Leads4pass mb-335 exam materials update contains New exam questions and answers, which is the most effective solution for Exam MB-335 “Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert”!

Download MB-335 exam materials with PDF and VCE: https://www.leads4pass.com/mb-335.html, easy learning, 3 days of exam practice planning to help you successfully pass the Microsoft MB-335 certification exam.

Leads4Pass MB-335 exam materials Details

The new exam preparation materials fully cover more than 90% of the actual MB-335 “Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert” exam.

Total Questions:	235
Single & Multiple Choice:	130
Drag Drop:	50
Hotspot:	55
Testlet:	6

New Leads4pass mb-335 exam questions and answers shared online

From	Number of exam questions	Type	Related exams
Leads4pass	15 (New)	Free	Microsoft Dynamics 365 exam materials

Question 1:

You need to plan scheduling for Customer1s\’ order of unscented solution.

What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

A. Schedule productions based on the capacity of the resources.

B. Schedule production based on the availability of raw material.

C. Split and plan operations in detail for each of the resources.

D. Plan scheduling of the production at the resource group level.

E. Run master planning with a specific time fence.

Correct Answer: AD

A: Finite and infinite capacity

When you consider capacity in production scheduling, you can select from two different methods:

Infinite – Unlimited capacity Finite – Limited capacity

When finite capacity is used, scheduling is influenced by the fact that the total load on the resource must not be greater than the capacity of the resource. Available time is defined as an interval when the resource, according to its calendar, is open and no other reservations are on capacity.

D: Operations or job scheduling that is based on finite (limited) capacity depends on the actual capacity that is available in the resource group or resource. If finite capacity is not defined on the resource or resource group, it is of no relevance if it is selected during scheduling because the resource or group setup overrides the scheduling setup. In other words, selecting finite capacity on the resources and resource groups is a prerequisite for them being considered as having finite capacity.

The strategy behind this functionality is that only bottleneck resources and groups are set up to operate with finite capacity, whereas scheduling of the other resources and groups reflects the possibility of increasing the capacity, for example,

with overtime.

Note: Customer1 orders 20 barrels of unscented solution. The order is confirmed. Production must be scheduled to start on December 21 to meet the customers delivery deadline.

The production quantity for the finished unscented liquid cleaning solution is 40 liters. IngredientC for unscented liquid cleaning solution is stored in inventory in 50-liter barrels and allocated in 50-liter increments. Two barrels of IngredientC are uses to produce a barrel of unscented liquid cleaning solution.

Incorrect:

Not E: Coverage time fences

Planners can define the planning horizon (the coverage time fence in days), and exclude supply and demand that falls beyond that horizon. Therefore, coverage time fences help prevent “noise” that is caused by supply suggestions that you don\’t have to react to for months. Examples include next year\’s forecast and customer orders that are placed far beyond the normal lead time.

A coverage time fence is the number of days after today\’s date (or, more precisely, the date when you do the planning run) that supply and demand is excluded. To help avoid delays, you must ensure that the coverage time fence is longer that the total lead time. The default system value is 100 days.

Reference:

https://learn.microsoft.com/en-us/training/modules/work-capacity-planning-scheduling-discrete-dyn365- supply-chain-mgmt/2-scheduling-options

Question 2:

HOTSPOT

You need to configure the requirements for metal fabrication equipment maintenance. What must you configure? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Hot Area:

Correct Answer:

Question 3:

A beverage company uses Dynamics 365 Supply Chain Management batch processing for production-

You need to identify the ingredient type used in batch processing when the base attribute of a product is added to a formula line.

What is the ingredient type?

A. active

B. compensating

C. filler

D. none

Correct Answer: A

Explanation:

The ingredient type used in batch processing when the base attribute of a product is added to a formula line is Active.

Here is the explanation:

A formula line is a line that identifies an ingredient or item that makes up a formula.

A formula line can have one of these ingredient types: None, Active, Compensating, or Filler1. The ingredient type determines how the system handles the line during master planning and batch order production1.

The Active ingredient type indicates that the item is an active ingredient that has a variable quantity and a fixed potency.

The active ingredient of a product is modeled by using a product-specific batch attribute that has a minimum value, a maximum value, and a target level2.

The target level of a batch attribute represents the estimated percentage of an active ingredient in a product2. When the base attribute of a product is added to a formula line, it means that the product has an active ingredient that is defined by the base attribute.

Therefore, the ingredient type for the formula line should be Active. This way, the system can calculate the amount of ingredients to use in a production batch based on the concentration of active ingredients in selected product batches2.

This process is known as batch balancing2.

1: Batch balancing 2: Formulas and formula versions

Question 4:

You use the master planning module for Dynamics 365 Supply Chain Management.

Planned production orders have been created.

Several sales orders are canceled in response to concerns about recent online reviews of a product.

You need to enable the appropriate action message.

Which action message should you enable?

A. Increase

B. Decrease

C. Advance

D. Postpone

E. Derived actions

Correct Answer: B

Decrease – The system will generate action messages when production orders, purchase orders, and other receipt transactions should be decreased to prevent excess inventory levels.

Incorrect:

*

Increase – The system will generate action messages when production orders, purchase orders, and other receipt transactions should be increased to prevent shortages in inventory.

*

Advance – The system will generate action messages, as they are needed, to move orders to an earlier date. In the Advance margin field, you can specify the maximum number of days that can pass between a receipt and an issue without an advance action.

*

Postpone – The system will generate action messages, as they are needed, to move orders to a later date. In the Postpone margin field, you can specify the maximum number of days that can pass between a receipt and an issue without a postpone action.

*

Derived actions – Action messages that are created for receipt transactions will be propagated to any derived requirements, and the necessary action messages will be generated for the receipt transactions that satisfy those requirements.

Reference: https://learn.microsoft.com/en-us/dynamics365/supply-chain/master-planning/action-messages

Question 5:

HOTSPOT

You are developing a new car audio system kit. The kit configuration has restrictions based on car model, speaker size, and other expression constraints.

You need to set up a new item for the car audio system.

How should you create the new product? To answer, select the appropriate option in the answer area.

NOTE: Each correct selection is worth one point.

Hot Area:

Correct Answer:

Question 6:

HOTSPOT

You need to resolve the production manager issue.

How should you configure manufacturing execution? To answer, select the appropriate option in the answer area.

NOTE: Each correct selection is worth one point.

Hot Area:

Correct Answer:

Reference: https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-production-parameters-inmanufacturing-execution

Question 7:

You need to resolve the issue for UserB.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution.

A. Set up configuration and weight for partial visibility.

B. Set up configuration and weight for full visibility.

C. Create a product master with predefined variants for ounces and boxes.

D. Create a catch weight item.

Correct Answer: BD

Mixes are generally stored and sold in 16-ounce bags. Some quantities are sold and distributed in 5, 10, and 20-gallon containers to large restaurants.

B: Catch weight items that use full visibility require that the inventory quantity is known for each catch weight unit. For example, assume shrimps are sold in boxes and the customer requires that each box must have a unique identification and a known weight. In this example, the item number for the boxes of shrimps should be created as a catch weight item that uses full visibility. You create catch weight items that use full visibility if you assign a unique serial number to each catch weight unit.

D: You often use catch weight products in industries where products can vary slightly by weight or size, or both, such as the food industry. Catch weight products use two units of measure ?an inventory unit and a catch weight unit. The inventory unit is the unit of measure in which the product is weighed and invoiced. The catch weight unit is the unit in which the inventory transactions are performed, such as sold, received, transferred, picked, and shipped. The nominal quantity represents the conversion between the catch weight unit and the inventory unit. Minimum and maximum quantities represent the allowed interval in which the inventory quantity can vary

Incorrect:

Not A: Catch weight items that use partial visibility require that the inventory quantity is known for batches of items that use a catch weight unit. For example, assume that a company receives a batch of 100 boxes of shrimps with a nominal

weight of 10 kilograms. Because all of the boxes belong to the same batch, they all use the same batch number. As each box can vary in weight, the whole batch of boxes is weighed. The number of boxes and their total weight can be

registered in a single transaction.

Not C: Product masters and product variants

In an agile world, where products must be quickly adapted to customer requirements, product definitions specify a set of products instead of distinct products. In Supply Chain Management, those generic products are known as product

masters. Product masters hold the definition and rules that specify how distinct products are described and behave in business processes. Based on these definitions, distinct products can be generated. These distinct products are known as

product variants.

A product master is associated with a product dimension group and a configuration technology to specify the business rules. The product dimensions (Color, Size, Style, and Configuration) are a specific set of attributes that can be used

throughout the application to define and track specific behaviors of the related products. These dimensions also help users search for and identify the products.

Configuration technologies

You can choose among three configuration technologies:

*

The predefined variants are defined by predefined product dimensions. The variant definition includes the definition of a specific valid combination of dimensions, such as Color, Style, and Size. Each combination produces a distinct product variant.

*

Etc.

Reference: https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/product-information https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-catch-weight-items

Question 8:

HOTSPOT

You need to configure system attributes.

Which attribute types should you use? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Hot Area:

Correct Answer:

Question 9:

A company implements Dynamics 365 Supply Chain Management for their Lean manufacturing environment.

There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.

You need to ensure that the engineering change takes affect at the end of the month.

Solution:

1.) Edit the existing step number two activity to be the new engineering process 2.) Edit the existing production flow. Set the expiration date due to the end of the month 3.) Edit the existing Kanban rule. Set the expiration date to the end of the

month 4.) Activate the production flow

Does the solution meet the goal?

A. Yes

B. No

Correct Answer: B

Question 10:

You need to configure the system to meet the order requirements for unscented cleaning solution.

Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

A. Add the ingredients for unscented cleaning solution to a regulated products inclusion list.

B. On the inventory management parameters, set the value for the Print Product Safety Data Sheet and Prevent Sales Pack Slip/Invoice Posting to TRUE.

C. In Document Handling, associate the PSDS file with the PSDS record and set restriction field set to Internal.

D. Configure the ingredient as a restricted and regulated product.

E. Ensure that the PSDS file is active and within the expiration date requirements.

Correct Answer: ABE

A: Regulated items are identified once they are listed as a regulated item. It is common that material may be regulated in just certain regions, countries, or states. Therefore, the restricted items are entered for each region. If items are not on a Regional regulated item list, they are assumed to be not regulated. This list can be accessed either through Inventory management or the released products form.

B: The inventory parameters (path: Inventory management Setup> Inventory and warehouse management parameters) allow you to govern the rules in the management of the product safety data sheet. These parameters are stored in an exclusive Product compliance section and are set within each legal entity. In this form you can outline:

*

Whether to automatically print safety data sheets when shipping.

*

Etc.

E: Expiry advice defines the number of days before the expiration date of product safety data sheets that the system should begin presenting messages.

Requirements, Liquid cleaning solution manufacturing, include:

An ingredient used to manufacture unscented cleaning solution is defined as a restricted product. You must be able to automatically print a product safety data sheet (PSDS) with the packing slip for any order that includes unscented cleaning

solution.

Reference:

https://dynamicconsulting.com/2020/10/29/managing-product-safety-data-sheets/ https://stoneridgesoftware.com/managing-product-safety-data-sheets-in-dynamics-365-operations/

Question 11:

You are a production manager at a company which produces large batches of coffee and creamers.

After a quality inspection, batch 120008 of your cold brew coffee (item number CB-0001) was found to be too acidic and must be reworked.

You need to add 20 grams of sugar and stir the product for an additional 0.S hours.

What three actions are required on the rework order? Each correct answer presents pan of the solution.

NOTE: Each correct selection is worth one point.

A. Manually reserve batch 120008 after estimating the batch order.

B. Add a route operation for 0.5 run time hours of stirring.

C. Add 20 grams of sugar to the production formula.

D. Delete all items from the production formula except for 20 grams of sugar.

E. Delete all route operations except for a half an hour stirring operation.

Correct Answer: BCE

Explanation: The correct answer is B, C, and E. Here is the explanation:

To rework a batch order in Dynamics 365 Supply Chain Management, you need to create a new batch order and set the Rework batch toggle to Yes1. You also need to select the Batch number of the original batch that needs to be

reworked1. The new batch order will have only one formula line that represents the original batch, and no route operations1.

To add 20 grams of sugar and stir the product for an additional 0.5 hours, you need to do the following actions on the rework order:

Question 12:

You need to configure costing for raw materials used to manufacture unscented cleaning solution. Which form should you use?

A. Cost basis type

B. Quantity and margin template

C. Pricing calculation

D. Pricing template

Correct Answer: B

Reference: https://docs.microsoft.com/en-us/dynamicsax-2012//quantity-and-margin-template-form?redirectedfrom=MSDN

Question 13:

A company has three jobs in a job queue. JobB and JobC start while JobA is in progress. The following table shows the estimated production time for each job.

The actual work hours and total bundle time are shown in the following table.

You need to calculate the allocated time for JobA by using a job allocation key. What is the total allocated time for JobA?

A. 1 hour

B. 2 hours

C. 4 hours

D. 6 hours

E. 8 hours

Correct Answer: B

Jobs allocation key

The formula for calculating allocated time. Here is the formula: Time per job = Total bundle time ?Number of jobs

Time per job = 6 hours / 3 = 2 hours

Note:

Estimation allocation key

Formula for calculating allocated time. Here is the formula: Time per job = Total bundle time ?(Estimated job time ?Total estimated time)

Reference:

https://learn.microsoft.com/en-us/dynamics365/supply-chain/production-control/allocate-time-jobs-job-bundleq

Question 14:

HOTSPOT

You need to modify the production order defaults for the manufacturing execution production order Start process.

What should you do? To answer, select the appropriate options in the answer area.

NOTE: Each correct selection is worth one point.

Hot Area:

Correct Answer:

Question 15:

You must ensure that the firepit product is available for sale. How should the product be released?

A. Release the engineering product version and then assign the route.

B. Connect the BOM to an engineering product version before release.

C. Connect a route to an engineering version before release.

D. Release the engineering product version and then assign BOM.

Correct Answer: B

…

New MB-335 exam questions online download

New MB-335 PDF

https://drive.google.com/file/d/1YLI9COxM9T50u6ve5NY1P8GUdM2iNp36/view?usp=sharing

In Conclusion

Leads4Pass mb-335 exam materials have been updated, including 235 new exam questions and answers. It also provides two very friendly learning methods: PDF and VCE.
Leads4Pass mb-335 exam preparation materials are provided in full compliance with the actual exam requirements, including Single & Multiple Choice, Drag Drop, Hotspot, and Testlet. It truly restores the actual exam scenario to help you pass the exam easily.

What’s more! Not only can you experience some of the Microsoft mb-335 exam questions online but you can also download them online.

Continue learning and read more questions about the Microsoft MB-335 certification:

Microsoft mb-335 important Q&A

Will the “Microsoft Dynamics 365 Supply Chain Management Functional Consultant Specialist” certification still be popular in 2025?

For so many years, some people have said that ERP is dead every year, but it is still alive and well! This shows that there is still a great demand for Microsoft Dynamics 365 certification now and for a long time, especially for supply chain professionals. So my conclusion is that in 2025 and for a long time to come, the “Microsoft Dynamics 365 The Supply Chain Management Functional Consultant Expert” certificate is well worth having.

What is the salary level for the “Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert” certificate?

Salaries for Microsoft Dynamics 365 Supply Chain Management Functional Consultant Specialist credential practitioners can vary widely based on a variety of factors, including experience level, location, company size, industry, and specific roles and responsibilities (e.g., warehouse management, transportation management ). From Indeed, the overall annual salary is 80,000 – 180,000, depending on whether you are an entry-level, mid-level, or senior expert.

Microsoft MB-335 exam prerequisites:

If you’re a functional consultant with advanced skills, a senior or principal functional consultant for a Microsoft partner, or a senior IT professional, developer, or information worker, this expert certification could be for you.

To gain more experience before you try to earn this certification, here are some suggestions:

1. To obtain the Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert certification, you need to meet one condition: you must have the Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate certification.

2. Exam MB-300 will retire on February 29, 2024. If you’ve passed Exam MB-330 but not Exam MB-300, be sure to pass Exam MB-300 before it retires. Otherwise, you’ll need to retake Exam MB-330. If you pass Exam MB-300 and earn the certification before Exam MB-300 is retired, you only need to renew your certification annually to maintain it.

Microsoft MB-335 Exam Topics:

Candidates for this exam are expert or senior supply chain functional consultants who implement and configure advanced features of Dynamics 365 Supply Chain Management to meet the requirements of a business. They have an advanced knowledge of supply chain management operations including production, logistics, master planning, and asset management. The candidate will identify use cases for applying mixed reality.

Candidates analyze business requirements translate those requirements into fully realized business processes and solutions and apply industry-recommended practices to implementations.

Candidates demonstrate expertise in one or more of the following manufacturing methods: discrete, process, and lean. The candidate partners with architects, developers, consultants, and other stakeholders to implement solutions that meet or exceed the needs of their customers.

• Configure products (15-20%)
• Configure production prerequisites (20-25%)
• Implement production methods (15-20%)
• Configure production control (20-25%)
• Describe and implement additional supply chain management features (10-15%)

Get More>> https://learn.microsoft.com/en-us/credentials/certifications/resources/study-guides/mb-335

Schedule the Microsoft MB-335 Exam

Exam name:	Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert
Exam code:	MB-335
Time:	120 minutes, If the exam isn’t available in your preferred language, you can request an additional 30 minutes to complete the exam.
Exam Format:	Build list, Case studies, Drag and drop, Multiple choice, Labs, Mark review, More… Most questions cover features that are general availability (GA). The exam may contain questions on Preview features if those features are commonly used.
Eligibility/Pre-Requisite:	Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate
Number of Questions:	Between 40-60 questions
Exam Fee:	$165 USD
Exam Language:	English
Passing score:	700
Ways of registration:	Pearson VUE

Summarize:

Microsoft mb-335 important Q&A solves all your questions in preparing for the exam, you can also view more related information by searching! The most important thing is that you can get the most effective Microsoft mb-335 exam solutions: https://www.leads4pass.com/mb-335.html
(MB-335 exam materials), use PDF or VCE to help you practice exams easily, ensuring that you 100% pass the Microsoft MB-335 certification exam.